303 Fabric Guard restores lost water-repellency. Unbeatable protection against soiling, water-based and oil-based stains. For all indoor and outdoor fabrics, synthetic and natural fibers. Non-toxic and odorless when dry.
Before using 303 Fabric Guard: Use only on thoroughly clean textiles, free of soiling and cleaning agent residues. For best cleaning results use 303 Fabric/Vinyl Cleaner. Always test for colorfastness. Spray a hidden area with 303 Fabric Guard. Wipe sprayed area with a white absorbent cloth. If any color rubs off, DO NOT USE. Use 303 Fabric Guard on indoor and outdoor fabrics, upholstery and carpeting. For all natural and synthetic textiles and blends - solution dyed acrylic, polyester, nylon, cotton, wool, silk and fine leathers including suede.
Directions: Spray until evenly wet, overlapping sprayed areas. Allow treated material to dry completely before use. Protect other surfaces from overspray. If sprayed onto adjacent surface, wipe up immediately.
Note: Reduced coverage when applied with paintbrush or roller. Not for vinyl, clear vinyl, plastics, rubber, fiberglass or imitation suede. Use above 70 degrees. (Quicker drying/curing and best results on hot day full sun). Treated material must be protected from rain/dew until completely cured. If these steps are done correctly, at this point the material will be water repellent. Curing: 6-12 hours depending on temperature. Coverage 50-75 sq. ft. per 16 oz on lightweight fabric, 40-75 st ft. For heavier fabrics depending on material density and application method. 303 Fabric Guard is non-toxic and odorless when dry.
Please note that this item cannot be shipped to Hawaii or Alaska. We apologize for the inconvenience.